t2.gif (1844 bytes) name.gif (5620 bytes)
line.gif (64 bytes) About Us line.gif (64 bytes) Our Products line.gif (64 bytes) New Products line.gif (64 bytes) New Products line.gif (64 bytes) line.gif (64 bytes)

     

      PC Board Connectors

    1.27mm Pin Headers

3. No. of  Ways 4. Contact Type 5. Contact Plating 6. No. of Rows 7. Pin Length (mm)
3-32
  pins per row
S1:  Straight with1.7mm low profile insulator
S2: Straight with 2.54mm insulator
S3: Straight with 3.0mm insulator
R1: Right angle with 2.54mm insulator (double rows only)
S4: Straight with double 2.54mm insulators
G:  Gold flash
T: Tin plated
S: Single row
D1:  Double rows, 
pitch  1.27 x 1.27mm
D2: Double rows, 
pitch  1.27 x 0.54mm
Specify lengths needed for sections A, C and B. 
Example: 2.8/6.1/1.2 for
straight, double rows* of
insulators; or 2.8/2.6 for
straight, single row of insulator.
Engineering Drawing
*  Right-angled pin headers are not available with double insulators.

      2.0mm Pin Headers

3. No. of Ways 4. Contact Type 5. Contact Plating  6. No. of Rows 7. Pin Length (mm)
2-40 
pins per row
S1:  Straight with1.5mm low profile insulator
S2: Straight with 2.0mm insulator
R1: Right angle with 2.0mm insulator
R2: Right angle with 2.54mm insulator
S3: Straight with double 2.0mm insulators
G:  Gold flash
T: Tin plated
S:  Single row
D: Double rows
Specify lengths needed for
sections A, C and B.
Example: 6.0/7.5/2.8 for
straight, double rows* of
insulators; or 6.0/3.0 for
straight, single row of
insulator.
 

Engineering Drawing
*  Right-angled pin headers are not available with double insulators.

       2.54mm Pin Headers

3. No. of Ways 4. Contact Type
1-40 pins per row
S1: Straight with single insulator
S2: Straight with double insulators
R1:  RA, space between edge of insulator and centerline of angled tail: 1.5mm
R2: RA, space between edge of insulator and centerline of angled tail: 2.0 mm
R3: RA, space between edge of insulator and centerline of angled tail: 0.0mm
R4: RA, height from PCB surface to centerline of angled post: 4.8mm
R5: Right angle, height from PCB surface to centerline of angled post: 6.0mm
  * R3, R4 & R5 are available for right angle, single row of contacts only.
       
5. Contact Plating 6. No. of Rows 7. Pin Length (mm)
G:  Gold flash
T: Tin plated
S:  Single row
D: Double rows
T: Triple rows*
Specify lengths needed for sections A, C and B. Example: 6.0/10.4/3.0 for straight, double rows* of insulators, or 6.0/3.0 for straight, single row of insulator.
 *  Right-angled pin  headers are not  available with double insulators. 
* Triple rows are available with single insulator only.

 

Engineering Drawing
* The insulator height of the above pin headers is 2.54mm.   1.5mm height is also available as an option.

     SMD Pin Headers with Single Line of Insulator

3. Pitch 4. Insulator Height 5. No. of   Ways 6. Contact   Plating
1:  1.27mm
2: 2.00mm
3: 2.54mm
A:  1.5mm
B: 2.0mm
C: 2.54mm
3-40 pins per row
G:  Gold flash
T: Tin plated
S: Selective Gold
   
7. No. of Row(s) 8.Post Height 9. Alignment Peg  10. Pick & Place Pad
S1:  Single row, S1 type
S2: Single row, S2 type
D1: Double rows, 
Pitch 1.27x1.27mm
D2: Double rows,
Pitch 1.27x2.54mm
D3: Double rows,
Pitch 2.00x2.00mm
D4: Double rows,
Pitch 2.54x2.54mm
In mm. Example: 6.0 = 6mm
Blank: Without peg
A: With peg*
*Not available with 2.54mm  pitch
Blank:  Without Pick & Place pad
P: With Pick & Place pad

 

Engineering Drawing

   SMD Pin Headers with Double Lines of Insulator (Board Stackers)

3. Pitch 4. Ways 5. Contact Plating 6. No. of Rows
1:  1.27mm
2: 2.00mm
3: 2.54mm
3-50 pins per row
G:  Gold flash
T: Tin plated
S: Selective gold
S1:  Single row, S1 type
S2: Single row, S2 type
D1: Double rows,
Pitch 1.27x1.27mm
D2: Double rows, 
Pitch 1.27x2.54mm
D3: Double rows, 
Pitch 2.0x2.0mm
D4: Double rows, 
Pitch 2.54x2.54mm
7. Stacker/post Height 8. Alignment Peg 9. Pick & Place Pad  
Specify the lengths needed for stacker (A) and post (B) Example:
6.0/1.6 = 6mm stacker and 1.6mm post heights
Blank: Without peg
A: With peg*
* Not available with 2.54mm pitch
Blank:  Without P&P pad
P: With P&P pad

Engineering Drawing

      Shrouded Headers

2. Type 3. Pitch 4. Function 5. Contact Type
T:  Thru-hole
S: SMD
1:  1.27mm
2: 2.00mm
3: 2.54mm
A:  PCB DIP type
B: IDC type
S:  Straight
R: Right angle
 
6. No. of Ways 7. Contact Plating
10 to 100 pins available for 1.27mm pitch
10 to 68 pins available for 2.00mm pitch (8 pins on request)
10 to 64 pins available for 2.54mm pitch (6 and 8 pins on request)
G:  Gold flash (standard)
S: Selective gold
 
8.  Mounting Ears 9. Contact Plating
S:  Standard without mounting ears for PCB DIP type
N: Without slotted mounting ears for IDC type
Y: With slotted mounting ears for IDC type
Blank:  Without latches
L: Long latches
S: Short latches

     1.27mm Socket Strips

3. Type 4. No. of Ways 5. No. of Rows 6. Contact Plating 7. Insulator Height
T:   Thru hole
S: SMD
5-50 pins per row
D: Double rows
* Single row socket strips are available with wave insulators.  Please refer to the Section of 1.27mm Socket Strips with Wave Insulator for more information.
G:  Gold flash
T: Tin plated
Thru hole Type: SMD Type:
A: 3.4mm A:  3.4mm
B: 4.3mm B: 4.3mm
  C: 2.2mm*

* C type of insulator is available with top or bottom entry.  Alignment pegs are available as an option for bottom entry types.

     1.27mm Socket Strips with Wave Insulators

1. Code Name 2. Pitch 3. Type  
FHW: 
Female header with wave insulator		 1:.27mm         
T: Thru hole
S1:  SMD , single row, S1 type
S2:  SMD , single row, S2 type
S3:  SMD , double row type (alignment pegs available as an option)
         
4. No. of  Ways 5. Row (s) 6. Contact Plating 7. Insulator Height  
5-50 pins per row
S:  Single row
D: Double row
G:  Gold flash
T: Tin
Thru-hole Type:  SMD Type:
A: 4.6mm W:   5.8mm
B: 8.5mm
 

Engineering Drawing

      2.0mm Socket Strips

 

3. Type 4. No. of Ways 5. No. of Rows
T: Thru hole
S1:  SMD, single row, 
S1 type
S2: SMD, single row, 
S2 type
S3: SMD, double row  type
Thru-hole Type:  SMD Type:
3-40 pins per row for straight version 4-25 pins per row for single row of contacts
4-17 pins per row for 
right angle version		 3-30 pins per row for double rows of contacts

* Right angle types are not available with double or quadra rows.
S: Single row
D: Double rows
Q: Quadra rows (thru-hole types only)
 
* Alignment pegs are available as an option for SMD       d  double row types.
6. Contact Plating 7. Contact Type 8. Insulator Height
G:  Gold flash
T: Tin
S:  Straight
R: Right angle (thru-hole types only)
Thru- hole Type: SMD Type:
A:  4.0mm W:  2.2mm
B: 4.3mm X: 2.5mm
C: 4.5mm Y: 2.8mm
    Z: 4.1mm
 * Single row versions are not available with height lower than 2.8mm.
* SMD low profile versions are also available with bottom entry types.

Engineering Drawing

    2.54mm Socket Strips

3. Type 4. No. of Ways 5. No. of Rows 6. Contact Plating
T: Thru hole
S1:  SMD, single row, S1 type
S2:  SMD, single row, S2 type
S3:  SMD, double row  type (alignment pegs available as an option)
3- 40 pins per row
S:  Single row
D: Double rows
T:

Triple 
(8.5mm high,straight types only)
G:  Gold flash
T: Tin plated
7. Contact Type 8. Insulator Height
S:  Straight
R: Right angle (for 5.7 and 8.5mm body heights only)
Thru-hole Type: SMD Type:
A:   5.0mm (dual beam) W:   7.1mm
B: 5.0mm (dual beam, dual entry)    
C: 5.7mm    
D: 6.8mm (dual beam box type contacts, 
for double rows only)       		    
E: 7.1mm(dual beam, single row only)    
F: 8.5mm    
G: 8.5mm (dual beam)    
H: 8.5mm (dual beam, with wave type of insulator)    

Engineering Drawing

    2.54mm Socket Strips - Elevated Type

4. No. of Ways 5. No. of Rows 6. Contact Plating 7. Contact Type
3-40 pins per row
S:  Single row
D: Double rows
T:

Triple rows
G:  Gold flash
T: Tin plated
S:  Straight
8. Body (A)/Tail (B) in mm
1A:  11.05/2.30        1B:  11.05/7.35        1C:  11.05/12.2
            2B: 13.59/4.85        2C: 13.59/9.65
           3B: 16.13/2.30        3C: 16.13/7.10
               4C: 18.67/4.60

Engineering Drawing

    2.54mm IC Sockets

2. No. of Ways 3. Row Spacing 4. Tail Style
6-64 pins
* Over-the-component versions are 
available for 24, 28, 32, 40  and 48 pins.
* Pitch 1.778mm on request
3:  0.3”
6: 0.6”
S:   Standard
K: Kinked retention type

    2.54mm Machine Pin Sockets

2. Type 3. No. of Ways         4. Row Spacing 5. Contact Plating
S:  SIP type
D: DIP type
SIP Type: DIP Type:
1-40 pins 1-40 pins available with 0.1” row spacing
  6/8/10/14/16/18/20/22/24/28 pins available with 0.3” row spacing
  24/28/32/36/40/42/48/50/52 pins available with 0.6” row spacing
* Over-the-component versions can be supplied as a special requirement for 18 and 24 pins.
       0:  0” (SIP type)
       1: 0.1”
       3: 0.3”
       6: 0.6”
G: Gold flash
G10:  10µ” gold plating
T: Tin plated

    PLCC Sockets

2. Type 3. No. of Ways 4. Insulator  5. Polarization
T: Thru hole
S:  SMD
20, 28, 32, 44, 52, 68, 84 pins
A:  PBT (Thru-hole types only)
B: PPS
C:

PPS thin wall 
(with 68 or 84 pins only)
Blank:  Without polarization peg
P: With polarization peg 
(SMD types only)

    DIN41612

2. Type  3. No. of Ways 4. Contact Loading 5. Contact Plating
P: Male
S:  Female
16, 32, 48, 64, 96 pins
A:  a row loaded D:  b +c rows loaded
B: b row loaded E: a +c rows loaded
C: a+b rows loaded F: a +b+c rows loaded
G:   Gold flash
S: Selective gold
6. Insulator Type 7. Connector Type 8. Tail Length
1:  A type, long body 4:  B type, short body
2: A type, short body 5: C type, long body
3: B type, long body 6: C type, short body
S:  Straight
R: Right angle
A:  2.5mm
B: 2.9mm 
(right angle types only)
C: 4.0mm
D: 13.0mm

Engineering Drawing 1, Drawing 2

    FPC/FFC Connectors

    SMT, ZIF Flexible Printed Circuit Board Connectors

2.  Pitch 3. No. of Ways 4. Contact Type 5. Terminal Form      6. Packaging  
A:  0.5mm
B: 0.8mm
C: 1.0mm

3-60 contacts for 0.5mm pitch Versions
3-30 contacts for 0.8 and1.0mm pitch versions

B:  Bottom contact type
T: Top contact type
H:  Horizontal
V: Vertical
R:  Tape/Reel
T: Tube