t2.gif (1844 bytes) name.gif (5620 bytes)
line.gif (64 bytes) About Us line.gif (64 bytes) Our Products line.gif (64 bytes) New Products line.gif (64 bytes) New Products line.gif (64 bytes) line.gif (64 bytes)

     

     CABLE ASSEMBLY

    Part Numbering System

          

1. Connector(s), number of positions & contact type 
   DS__P:  D-sub, male 1394/6:  IEEE1394 plug, 6 positions
DS__S:  D-sub, female 1394/4:  IEEE1394 plug, 4 positions
HDS__P:  High Density D-sub, male U1P:  USB A type plug
HDS__S:  High Density D-sub, female U1S:  USB A type receptacle
MD__P:  Half pitch D-sub, male U2P:  USB B type plug
MD__S:  Half pitch D-sub, female U2S:  USB B type receptacle
  IDS__P:  IDC type D-sub, male U3P:  Mini USB A type plug
   IDS__S:  IDC type D-sub, female U3S:  Mini USB A type receptacle
HIDS__M:  Half pitch IDC type D-sub U4P:  Mini USB B type plug
MC__P:  Half pitch centronic, male DVI2P:  DVI-D, 12 pins, male, single link
MC__S:  Half pitch centronic, female DVI2S:  DVI-D, 12 pins, female, single link
DIN__P:  Din plug, male DVI4P:  DVI-D, 24 pins, male, dual link
DIN__S:  Din plug, female DVI4S:  DVI-D, 24 pins, female, dual link
MDIN__P:  Mini din plug, male DVI9P:  DVI-I, 29 pins, male, analog integrated
MDIN__S:  Mini din plug, female DVI9S:  DVI-I, 29 pins, female, analog integrated
C5__:  Category 5  RJ45 plug FC127-__:  IDC socket (pitch: 1.27mm)
CE__:  Card edge (pitch: 2.54mm) FC200-__:  IDC socket (pitch: 2.00mm)
FC254-__:  IDC socket (pitch: 2.54mm)

     * Power cords and other types of connectors are also available. Please contact us for more details.

Notes:
1. Fill in the number of positions required in the blank. Example: DS25P = D-sub 25 pins, male
2. If more than one of the same connector is required, multiply quantity when designating connectors.
   Example:   FC34X2 = Two IDC sockets, 34 positions
3. Specify, for a flat cable assembly, if the connectors face in the same direction or any of them is reversed.
4. Specify, for an IDC cable assembly, if a strain relief is required.
5. Specify, for a patch cord, if the color of the boot is different from that of the cable.

 

2 Cable Type

3. Wire Gauge

4. Wire Type 5. Wire Color 6. Process Method
F:  Flat cable
R: Round cable
A:  18 AWG
B: 20 AWG
1:  Unshielded
2: Foil shielded
3: Foil shielded twist pair
4: Braid shielded
5: Braid shielded twist pair
B:  Black
E: Beige
U: Blue
A: Gray
G: Green
R: Red
Y: Yellow
A:  Assembled
M: Molded

     

7. Length         
Specify in  meters, or feet and inches.  
Example: 2M = 2 meters, 2F8 = 2 feet and 8 inches